IDEC High Performance Series - Manual (Page 784)

6 Multi-Command
12-48 WindO/I-NV2 User’s Manual
*2 This is applicable for models with the memory card interface only.
*4 HG2G-5F, HG3G/4G only
• These operations cannot be performed simultaneously.
- Outputting to the memory card by pressing the Multi-Command. *2
- Outputting to the printer by pressing the Multi-Command.
- Printing alarm logs
*4
• It may take some time to output screenshots when copying files using the USB Autorun function or a Key
Button.
• The HG2G-5F, HG3G/4G cannot stop printing in the middle of a page, even when the print job is
canceled. Print jobs after the current print job are canceled after the current page finishes printing.
• When printing a screenshot from the HG3F/4F using SII DPU-414 printer, the printed image will only
include 320 pixels from the left edge of the screen.
The maximum number of screenshots that can be captured (1 to 999) can be set in HG Special Registers
LSD65. (Default: 99)
The methods to erase screenshot files saved on the memory card are as follows.
• To erase files during operation using parts, on the Memory Card tab on the Project Settings dialog box,
select the Remove Files stored in Memory Card check box and the All Screenshot data check box,
and then configure the trigger device. Assign that trigger device to a part.
• To erase files with WindO/I-NV2, click Clear on the Online tab, and then click Stored Data in Memory
Card to open the Clear Data dialog box. Select the Screenshot Data check box and click OK.
• To erase files on the HG2G-5F and the HG3G/4G, select the files to erase with the System Menu File
Manager, and then press DEL.