IDEC High Performance Series - Manual (Page 81)

WindO/I-NV2 User’s Manual 2-51
3 Configuration & Functions
2
WindO/I
-NV2 F
eatures & B
asic Oper
ations
■ Monitors
■ Communication
Command Description
Start/Stop Monitor
Connects the MICRO/I to the host device and starts monitoring. This
command also stops monitoring.
Start/Stop Simulation
Starts a simulation with the MICRO/I disconnected from the host. This
command also stops the simulation.
Screens Shows or hides the Screen Monitor window.
Object List
Displays a device value in a popup and emphasizes the object that is
satisfying the trigger condition in the object list or script editor.
Custom Shows or hides the Custom Monitor window.
Batch Shows or hides the Batch Monitor window.
Hosts Shows or hides the Host Monitor window during 1:N communication.
Back
Returns to the Base Screen that was displayed immediately before the screen
was changed.
Forward
Advances to the Base Screen that was displayed immediately before the
screen was changed with the Back command.
Go to Screen
First Screen Switches to the Base Screen with the smallest screen number in the project data.
Previous Screen
Switches to the Base Screen with a screen number one smaller than the Base
Screen currently displayed. If the screen numbers are not consecutive
numbers, this command switches to the closest number.
Screen Number Switches to the Base Screen with a specified number.
Next Screen
Switches to the Base Screen with a screen number one larger than the Base
Screen currently displayed. If the screen numbers are not consecutive
numbers, this command switches to the closest number.
Last Screen
Switches to the Base Screen with the largest screen number in the project
data.
Open Current Screens Opens a monitored screen in the editing window.
Command Description
Setup
Configures the communication target and communication conditions between
the target and the MICRO/I or between the computer and the MICRO/I.