IDEC High Performance Series - Manual (Page 1093)

WindO/I-NV2 User’s Manual 24-1
24
Online F
unction
This chapter describes in detail on how to setup the online function and the operation of the MICRO/I.
1.1 How the Online Function is Used
The online function enables communication with the MICRO/I in WindO/I-NV2. This communication between
WindO/I-NV2 and the MICRO/I, implemented using an exclusive protocol called maintenance communication.
The online function enables the following.
• Write a project data into the MICRO/I.
• Write files to an external memory inserted in the MICRO/I.
*1 HG2G-5F, HG3G/4G, HG2F/3F/4F only
*2 HG2G-5F, HG3G/4G only
*3 This is applicable for models with a video interface only.
Chapter 24
Online Function
1 Communicating with the MICRO/I
HG3G HG2G-5F HG2G-5S HG2G-S HG4G HG1F HG2F HG2S HG3F HG4F
Computer
Download
MICRO/I
Project data
When project data is downloaded using the online function, the Alarm Log data, Data Log data, and
Operation Log data in the data storage area are deleted. All internal devices except for the HG Keep Register
(LKR) and HG Keep Relay (LK) are cleared.
• The following functions can be executed with downloading of project data.
- Download additional fonts.
- Download the runtime system.
- Download recipe files
*1 , picture files *1 , and sound files *2 to the Memory Card Folder in the external
memory inserted into the MICRO/I.
- Clear the HG Keep Register (LKR) and HG Keep Relay (LK) after download.
- Start running the control functions after download.
• For details on writing project data to an external memory inserted in the computer, refer to Chapter 30
“Downloading” on page 30-10.
Computer
Memory Card
MICRO/I
Download
Recipe file
Picture file
Sound file
Movie file
Movie file list
*1
*1
*2
*3
*3