5 host port extension tab, Host port extension tab -49, Project set tings – IDEC High Performance Series User Manual
Page 235
WindO/I-NV2 User’s Manual
4-49
3 Project Settings Dialog Box
4
Project Set
tings
3.5 Host Port Extension Tab
The Host Port Extension tab is used to configure the host I/F extension settings. These settings vary based on the
host. This tab is displayed when host I/F extension settings are required. For details, refer to the External Device
Setup Manual.
HG3G
HG2G-5F
HG2G-5S
HG2G-S
HG4G HG1F HG2F HG2S HG3F HG4F
This manual is related to the following products: