IDEC High Performance Series - Manual (Page 1272)

2 USB Flash Drives
30-28 WindO/I-NV2 User’s Manual
●
Uploading a PLC program file
Uploads the PLC program from the PLC connected to the MICRO/I and saves it in ZLD format to an SD memory card
or a USB flash drive.
●
Copy files
Copies files between the USB flash drive and SD memory card inserted in the MICRO/I.
USB flash drive -> SD memory card
Copies files saved on the USB flash drive to the SD memory card inserted in the MICRO/I.
SD memory card -> USB flash drive
Copies files saved on the SD memory card inserted in the MICRO/I to the USB flash drive.
HG3G HG2G-5F HG4G
Save Save Upload
PLC
Computer
PLC program file
(ZLD format)
USB Autorun
definition file
(hgauto.ini)
SD Memory
Card
USB flash drive
MICRO/I
Refer to Chapter 28 “2 PLC Program Transfer Function” on page 28-20 for compatible PLCs, important notes,
and limitations.
HG3G HG2G-5F HG4G
Save Copy
Computer
USB Autorun
definition file
(hgauto.ini)
File File
SD Memory Card USB flash drive
MICRO/I
Refer to Chapter 28 “3 File Copy Function” on page 28-33 for important notes and limitations.
HG3G HG2G-5F HG4G
Save Copy
Computer
USB Autorun
definition file
(hgauto.ini)
File
SD Memory Card USB flash drive
MICRO/I
Refer to Chapter 28 “3 File Copy Function” on page 28-33 for important notes and limitations.