IDEC High Performance Series - Manual (Page 681)

WindO/I-NV2 User’s Manual 11-9
1 Bar Chart
11
Charts
●
Data Over Tab
The Data Over tab is displayed in Advanced mode.
■ Range
Select data type.
Specifies the allowable range of values to display.
Value: Specifies the minimum and/or the maximum as a constant.
Device: Specifies the minimum and/or the maximum as a word device value.
Minimum, Maximum: Select these check boxes to specify the minimum and/or maximum.
The minimum and maximum that can be specified when Value is selected vary based on the
data type selected with Data Format on the General tab. For details on data types, refer to
Chapter 2 “1.2 Available Data” on page 2-2.
When Device is selected, these options specify the source word devices.
Click to display the Device Address Settings dialog box. For the device address
configuration procedure, refer to Chapter 2 “5.1 Device Address Settings” on page 2-67.