IDEC High Performance Series - Manual (Page 1179)

WindO/I-NV2 User’s Manual 27-21
2 Web Server Function (HG3F/4F)
27
Maintenance
3 Click the OK button.
The alarm log data page is displayed and shows the alarm log data in the selected range.
See example below.
Display item Description
Project Name
The same as the alarm log data request form.
You can change the range to display the alarm log without returning to the alarm
log data request form.
Start
End
OK button
Reset button
(Data list)
Ch. No. Shows the channel number.
Message
Shows the alarm message. (When characters other than half-width alphanumeric
characters are included on the English page, the project name is shown as
“-Wrong Strings-”.)
When there are characters other than half-width alphanumeric characters
included on the Japanese page, the message language information is only shown
when Japanese.)
Occurrence Time Shows the date and time the alarm occurred.
Recovery Time Shows the date and time the alarm was recovered.
Confirmation Time Shows the date and time the alarm was confirmed.
(Data list)
If an alarm occurs while processing the display of alarm log data in descending order, the oldest data is
overwritten by the alarm that occurred. Therefore, the actual amount of alarm log data displayed may be
less than the amount specified by the display range.