IDEC High Performance Series - Manual (Page 1196)

1 Project Transfer Function
28-2 WindO/I-NV2 User’s Manual
●
Upload the project data used for operation on the MICRO/I and save it to a memory card or USB
flash drive.
• HG2G-5F, HG3G/4G
• HG2F/3F/4F
1.2 Project Data Transfer Procedures
The following methods can be used to upload or download project data between the MICRO/I and a memory card or
USB flash drive inserted in the MICRO/I.
• Using the USB Autorun function (HG2G-5F, HG3G/4G only)
 For details, refer to Chapter 30 “2 USB Flash Drives” on page 30-25.
• Using Key Buttons, Multi-Buttons, or multi-commands (HG2G-5F, HG3G/4G only)
 For details, refer to “1.4 Using Key Buttons, Multi-Buttons, or Multi-Commands to Transfer Project Data” on
page 28-6.
• Using the MICRO/I system menu
 For details, refer to “1.5 Using the MICRO/I System Menu to Transfer Data” on page 28-7.
HG3G HG2G-5F HG4G
SD Memory Card
Upload
Upload
MICRO/I
USB flash drive
Project File
(ZNV Format)
When using the project transfer function and a project file is uploaded, the project file name is “project
name + file extension (.ZNV)”.
HG2F HG3F HG4F
CF Card
Upload
MICRO/I
Project Data
Memory cards can only be used on models that have the memory card interface.