IDEC High Performance Series - Manual (Page 193)

WindO/I-NV2 User’s Manual 4-7
1 Creating and Manipulating WindO/I-NV2 Project Data
4
Project Set
tings
3 Click OK.
The Save As dialog box is displayed.
Click Cancel to stop converting the project data in the previous format and close this message.
4 Specify the location to save the converted project data and enter the project name.
5 Click Save.
The Convert the project data dialog box is displayed and the data conversion process for the project data in the
previous format begins.
When the data conversion process ends, Close is displayed.
6 Click Close.
Next, open a screen. For details, refer to Chapter 5 “2.2 Opening Screens” on page 5-3.
• You cannot use the following characters in the project name.
. \ / : * ? “ < > |
• You cannot create project data in read-only folders or in WindO/I-NV2's working folders (temporary
folders that begin with “~” ).