IDEC High Performance Series - Manual (Page 889)

WindO/I-NV2 User’s Manual 15-7
1 Overview
15
Oper
ation Log Function
1.5 Using the Data
The saved data can be used in the following ways.
• Save to and read from a memory card
Output data from the MICRO/I to the memory card as a CSV file
and use it on a PC.
For details, refer to “4.1 Saving the Data as a CSV File” on page
15-20.
• Upload the data with the WindO/I-NV2 utility Downloader
Use the uploaded data as a CSV file on a PC.
For details on Downloader, refer to the Downloader manual.
OperaƟon Log data
Sampling Time User Screen No. Event Name Part Name Details Changed to
12/01/2011 12:00:10 - Base1 Power ON - - -
12/01/2011 12:01:23 User1 Base1 Switch to Base Screen - - Base2
12/01/2011 12:02:45 User1 Base2 Change Users - - User2
12/01/2011 12:03:06 User2 Base2 Change OperaƟon Modes - - System Mode
12/01/2011 12:04:11 User2 Base2 Press buƩons BitSwitch - -
12/01/2011 12:04:11 User2 Base2 Write Data to any Devices - LDR 0 55
OperaƟon Log data
(CSV)
Book1
Sheet1 Sheet2 Sheet3
Sampling Time User Screen No. Event Name Part Name Details Changed to 12/01/2011 12:00:10 - Base1 Power ON - - - 12/01/2011 12:01:23 User1 Base1 Switch to Base Screen - - Base2 12/01/2011 12:02:45 User1 Base2 Change Users - - User2 12/01/2011 12:03:06 User2 Base2 Change OperaƟon Modes - - System Mode 12/01/2011 12:04:11 User2 Base2 Press buƩons BitSwitch - - 12/01/2011 12:04:11 User2 Base2 Write Data to any Devices - LDR 0 55