IDEC High Performance Series - Manual (Page 895)

WindO/I-NV2 User’s Manual 15-13
3 Operation Log Settings Dialog Box
15
Oper
ation Log Function
Event Name
■ Use Text Manager
Select this check box to use text registered in Text Manager for the event names when saving data as a CSV file.
■ Event Name
Specifies the text to display in Event Name in Text or Text ID.
Event name details are as follows.
Text: Double click the cell to enter the text to display as the event name. The maximum number is 40
characters.
Text can only be entered when the Use Text Manager check box is cleared.
Text ID: Double click the cell to specify the Text Manager ID number (1 to 32000) when using text registered in
Text Manager as the event name.
This option is only enabled if you select the Use Text Manager check box.
Power ON: The event name when the MICRO/I power is turned on.
Switch to Base Screens: The event name when the base screen is switched.
Change Users: The event name when the user is changed.
Change Operation Modes: The event name when the MICRO/I operation mode is changed.
Press buttons: The event name when a touch switch is pressed.
Write Data to any Devices: The event name when a value is written to a device by pressing a touch switch.