IDEC High Performance Series - Manual (Page 30)

4 Flow from Screen Creation and to Run Operation
1-6 WindO/I-NV2 User’s Manual
1 Launch WindO/I-NV2
Launch WindO/I-NV2.
2 Creating a Project and Screen
Create a project and performing various settings.
Create display screens.
3 Downloading the project
Connect the computer to the MICRO/I using a USB cable, Ethernet cable or Serial cable and download the created
project data to the internal memory of the MICRO/I.
4 Debug
Using the monitor function, you can correct created project data while confirming actual actions.
5 Troubleshooting
If there is a module or communication-related problem with the MICRO/I, or a problem with the screen, an
appropriate message is displayed at the top of the screen.
In addition, error information is saved to a special data register. By referring to this information and repeatedly
correcting the project, downloading, and debugging, the project can be completed.
6 RUN
Starting communication with the external device and execute various functions according to the project settings.
7 Maintenance
The Web Server function *1 allows the user to remotely monitor or operate the state of the O/Is from the web
browser. In addition, the saved data in the MICRO/I and files in External Memory can be uploaded to the computer.
*1 HG2G-5F, HG3G/4G, HG3F/4F only