IDEC High Performance Series - Manual (Page 730)

4 Meter
11-58 WindO/I-NV2 User’s Manual
●
View Tab
■ Image Type
Select the type of graphic to be used to represent the part.
■ Browse
Select the type of graphic to be used to represent the part from the list of graphics. Click this button to display the
View Browser or Picture Manager, depending on the setting for Image Type.
■ Needle Color
Selects the needle color of the Meter (color: 256 colors, monochrome: 16 shades).
Click Color to display the Color Palette. Select a color from the Color Palette.
■ Plate Color
Selects the plate color of the standard graphic (color: 256 colors, monochrome: 16 shades).
Click Color to display the Color Palette. Select a color from the Color Palette.
*1 HG2G-5F, HG3G/4G only
Standard: Uses the default graphic for WindO/I-NV2.
Picture *1 : Uses an image file saved using Picture Manager.
For details about image file restrictions, refer to Chapter 2 “1.5 Available Image Files” on page 2-20.
Needle color
Plate color