IDEC High Performance Series - Manual (Page 356)

2 Word Button
8-32 WindO/I-NV2 User’s Manual
■ Visible Condition *1
The Button is displayed while the condition is satisfied. The Button is hidden while the condition is not satisfied.
Example: When Trigger Type is While ON and Device is LM 0
While LM 0 is 0, the condition is not satisfied and the Button is hidden.
While LM 0 is 1, the condition is satisfied and the Button is displayed.
*1 HG2G-5F, HG3G/4G onlsy
While OFF: Enables the Button when the device value is 0.
While satisfying the condition:
Enables the Button when the condition is satisfied.
Data Type: Selects the type of data handled by the conditional expression for the input condition.
This option can only be configured if While satisfying the condition is selected for Trigger Type.
For details, refer to Chapter 2 “1.2 Available Data” on page 2-2.
Device: Specifies the bit device or bit of the word device to serve as the input condition.
This option can only be configured when While ON or While OFF is selected for Trigger Type.
Click
to display the Device Address Settings dialog box. For the device address configuration
procedure, refer to Chapter 2 “5.1 Device Address Settings” on page 2-67.
Condition: Specifies the conditional expression for the input condition.
This option can only be configured when While satisfying the condition is selected for Trigger
Type.
Click
to display the Trigger Condition Settings dialog box. For the conditional expression
configuration procedure, refer to Chapter 2 “5.2 Setting Conditional Expressions” on page 2-69.
Comment: Used for entering a comment for the input condition. The maximum number is 80 characters.
1
0
Enabled Enabled Enabled Disabled Disabled Disabled
Device value
Button state
Satisfied
Not satisfied
Disabled Disabled Disabled Enabled Enabled Enabled
Condition
Button state
LM0:
MICRO/I
0
LM0: 1
Show
Condition
Not
satisfied
Condition
Satisfied
Hide
• When Alternate is selected for Action Mode on the General tab, the button remains on when hidden
in the on state.
• When the ON delay check box is selected on the Options tab, if the button is hidden before the set time
elapses from when the button begins to be pressed, the on delay is reset and the button does not
operate.