IDEC High Performance Series - Manual (Page 273)

WindO/I-NV2 User’s Manual 5-21
3 Base Screen
5
Scr
ee
n
3.3 Operating When Drawing Objects and Parts Overlap
Place drawing objects and parts or parts with other parts so that they do not overlap.
When drawing objects and parts are placed or the screens are layered, if the drawing objects and parts have
overlapped , the following behaviors will occur.
●
When Drawing Objects and Parts Overlap
The parts will always be displayed on the foremost layer.
Example: A case where Base Screen: 2 is layered with base: 1 as the bottom most layer, and the Numerical Display
belonging to Base Screen: 1 and a drawing object belonging to Base Screen: 2 overlap.
●
When Parts Overlap
The behavior of overlapped parts will differ depending on the model selected and part types.
The following behaviors will occur when data or updated parts are displayed in front.
Example: A case where using the HG2G-S/-5S, Base Screen: 2 is layered with base: 1 as the bottom most layer, and the
Numerical Display belonging to Base Screen: 1 and Numerical Display belonging to Base Screen: 2 overlap.
1234
1234
Base Screen: 1 Base Screen: 2
Display for Base Screen: 1
Layering
The Numerical Display for Base Screen: 1 is displayed in front
Model Parts Action
HG2G-5F,
HG3G/4G
Selector Switch, Potentiometer, Alarm List Display, Alarm Log Display, Bar Chart,
Line Chart, Pie Chart
Displayed in front
Bit Button, Word Button, Goto Screen Button, Print Button, Key Button,
Multi-Button, Pilot Lamp, Multi-State Lamp, Numerical Input, Character Input,
Message Display, Message Switching Display, Numerical Display, Calendar, Meter
Not displayed in
front
HG2G-S/-5S
HG1F/2F/2S/3F/4F
All parts Displayed in front
567 1234
1234
567 9999
567
Base Screen: 1 Base Screen: 2
Display for Base Screen: 1
Layering
The Numerical Display for Base Screen: 1 and 2 is unchanged
The Numerical Display for Base Screen: 1 is changed
The Numerical Display for Base Screen: 2 is unchanged
The numerical
value changes
The Numerical Display for Base Screen: 1 is displayed in front
The Numerical Display for Base Screen: 2 is displayed in front
1234 1234
567
Base Screen: 2
Base Screen: 1
For the Message Display, Message Switching Display, and Alarm List Display, when the Scroll check box is
selected on the Format tab, the display is not correctly displayed when a part overlaps it.