IDEC High Performance Series - Manual (Page 329)

WindO/I-NV2 User’s Manual 8-5
1 Bit Button
8
Bu
tton
s
■ Destination Device
Specify the destination bit device.
Click to display the Device Address Settings dialog box. For the device address configuration procedure, refer
to Chapter 2 “5.1 Device Address Settings” on page 2-67.
Momentary: Pressing the button writes a 1 to the bit device.
Releasing the button writes a 0 to the bit device.
Release
Initial image
Press Release Press
1
Operation and
view
Data written 1 0 0
Write Action Write Write Write
Pressing and holding the button until the screen changes causes a 0 to be written to the bit device.
Alternate: Each press of the button alternately writes a 1 or 0 to the bit device.
Toggle: Pressing the button inverts the value of the bit device.
If the value of the bit device is 0 it changes to 1, and vice versa.
Move: Pressing the button writes the value in the source bit device to the value in the destination bit
device.
Release
Initial image
Press Release Press
1
Operation and
view
Data written 0
Write Action Write
Release
Initial image
Press Release Press
Operation and
view
Toggle Action Toggle
Release
Initial image
Press Release Press
Move
Operation and
view
Action Move