IDEC High Performance Series - Manual (Page 536)

2 Character Input
10-24 WindO/I-NV2 User’s Manual
2.1 How the Character Input is Used
The Character Input features a display mode that displays the character codes in current values of devices as text and
an entry mode that enters text using the keypad or key buttons and writes the character codes for the entered text to
devices. When the part is displayed on the screen, the Character Input is in display mode. To enter text by pressing
the keypad or key buttons, touch the Character Input to switch it to entry mode.
The Character Input can perform the following functions.
• Write the character codes for text entered with the keypad or key buttons to devices
• Display the character codes in current values of devices as text
• Display entered text as * (asterisk)
2 Character Input
HG3G HG2G-5F HG2G-5S HG2G-S HG4G HG1F HG2F HG2S HG3F HG4F
D100 :
D101 :
4847 (Hex) ‘H’ ‘G’
2053 (Hex)
4552 (Hex)
4945 (Hex)
5300 (Hex)
‘E’ ‘R’ D102 :
D103 :
D104 : (NULL) ‘S’
‘ ’ ‘S’
Host
MICRO/I
HG SERIES_
HG SERIES
Character Input
Standard keypad
D100 :
D101 :
4847 (Hex) ‘H’ ‘G’
2053 (Hex)
4552 (Hex)
4945 (Hex)
5300 (Hex)
D102 :
D103 :
D104 : ‘S’ (NULL)
‘ I ’ ‘E’
‘E’ ‘R’
‘ ’ ‘S’
Host
MICRO/I
HG SERIES
Host
MICRO/I
****
**** ****