IDEC High Performance Series - Manual (Page 727)

WindO/I-NV2 User’s Manual 11-55
4 Meter
11
Charts
4.2 Meter Configuration Procedure
This section describes the configuration procedure for meters.
1 On the Home tab, in the Parts group, click Charts, and then click Meter.
2 Click a point on the edit screen where you wish to place the Meter.
3 Double-click the dropped Meter and a Properties dialog box will be displayed.
4 Change the settings on each tab as necessary.
The Range tab, Scale tab and Options tab only appear in Advanced mode.
To switch to Advanced mode, click Advanced.