Metrohm tiamo 2.4 Manual - Manual (Page 968)

5.6 Commands
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
952 ￭￭￭￭￭￭￭￭
tiamo 2.4
Measured value
Input range
-20.000 - 20.000 pH
Time
Input range
0.0 - 999999.9 s
5.6.4.4 MEAS U
5.6.4.4.1 MEAS U - Overview
Dialog window: Method ▶ MEAS U ▶ Properties... ▶ MEAS U - 'Command name'
Command for potentiometric voltage measurements.
Instruments
This command can be executed with the following devices:
Titrando: 808, 809, 835, 836, 841, 842, 857, 888, 901, 902, 904, 905,
906, 907
Titrino: 702, 716, 718, 719, 720, 721, 736, 751, 758, 785, 794, 798,
799
pH/Ion - Meter: 867
Robotic Titrosampler: 855
Appearance
The command has the following appearance:
Parameters
The parameters for the command MEAS U are configured on the follow-
ing 4 tabs:
￭ General/Hardware
Parameters for devices, sensors and stirrers.
￭ Measuring parameters
Parameters for setting the measurement procedure.
￭ Evaluations
Defining further methods for evaluating measurement curves.
￭ Additional measured values
Defining further measured values which can be saved as additional col-
umns in the measuring point list.