Metrohm tiamo 2.4 Manual - Manual (Page 148)

3.6 Run subwindow
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
132 ￭￭￭￭￭￭￭￭
tiamo 2.4
The button is present only in the status HOLD (determination interrupted)
and COND HOLD (conditioning interrupted). Pressing [Cont] will cause
this button to be replaced again in the display by [Hold].
3.6.3.3 Single determination - Status display
Tab: Workplace ▶ Run ▶ Single determination
The current status of the workplace will be displayed on the Single
determination tab:
Status
Selection READY | BUSY | HOLD | COND BUSY | COND
READY | COND HOLD | ERROR
READY
Ready for starting a determination or for conditioning.
BUSY
Determination is running.
HOLD
Determination is interrupted.
COND BUSY
Conditioning is running (is displayed only when no determination is
running).
COND READY
Condition requirement is fulfilled (is displayed only when no determina-
tion is running).
COND HOLD
Conditioning is interrupted (is displayed only when no determination is
running).
ERROR
Error.
3.6.3.4 Single determination - Determination parameters
Subwindow: Workplace ▶ Run ▶ Single determination
User
If the option Enforce login with user name is activated in the security
settings, then the short name of the currently logged in user will be dis-
played in this field. This field is then not available for editing. If work is
done without registering, then a user name can be entered in this field
(only in the status READY).
Entry 50 characters