Metrohm tiamo 2.4 Manual - Manual (Page 460)

5.6 Commands
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
444 ￭￭￭￭￭￭￭￭
tiamo 2.4
NOTE
The selected workplace view will only be opened when starting a single
determination or starting the first determination of a series. It will not
be opened when a new method within a determination series is being
loaded .
Track display for live window
Live display 1
Selection of the track to be displayed in the subwindow Live display 1.
Selection Main track | Selection of available tracks
Default value Main track
Live display 2
Selection of the track to be displayed in the subwindow Live display 2.
Selection Main track | Selection of available tracks
Default value Main track
Statistics
on | off (Default value: off)
If this parameter is switched on, then the statistic functions defined in the
CALC command will be calculated.
NOTE
In order to make sure that the statistics will really be calculated, the fea-
ture must also be enabled in the Workplace program part on the Sin-
gle determination tab.
Number of single determinations
The number of single determinations defined here is valid for all CALC
commands in the method.
Input range 1 - 99
Selection not defined
Default value not defined
not defined
With not defined the number of single determinations must be speci-
fied on the tab Determination series in the subwindow Run of the
program part Workplace.