Metrohm tiamo 2.4 Manual - Manual (Page 68)

2.4 Formula editor
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
52 ￭￭￭￭￭￭￭￭
tiamo 2.4
Identifica-
tion Description Commands
.TITER Titer value of the solution used
for the command DET, MET, SET,
KFT, STAT,
STDADD dos,
STDADD auto,
ADD, DOS, LQH
TMF Transmission factor (dimension-
less) MEAS TMF
.TOL Tolerance within which a mea-
sured peak can be assigned to a
calibration wavelength. CAL Spec
.TOU Timeout status: 1 = Max. wait-
ing time expired; 0 = Max.
waiting time not expired RECEIVE, TRANS-
FER, SCAN
.UNI Mapping unit which is defined in
the configuration for an IO port
(Text) ANALOG IN,
ANALOG OUT
.VAL Value of the command variables
(optional, i.e. Command
name.Port name' = Command
name.Port name.VAL') (Num-
ber). The value returned is the
value after the ending of the
command. ANALOG IN,
ANALOG OUT,
DIGITAL IN, DIGI-
TAL OUT
.VAR Variance of the calculated result
of the command in the selected
unit CAL LOOP pH,
CAL LOOP Conc,
ELT LOOP,
STDADD
.VOL Dosed volume STDADD, ADD,
DOS, LQH
2.4.3.5 Result variables
Dialog window: Formula editor ▶ Variables
Result variables are method-specific and are defined in the CALC com-
mand of the method. The Variables field of the formula editor lists all
Result variables that are available for the current method.
Syntax
'RS.Result name.Variable identification'
Examples: 'RS.RS01.VAL' (='RS.RS01'), 'RS.testTime.UNI'