Metrohm tiamo 2.4 Manual - Manual (Page 431)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
5 Method
tiamo 2.4
￭￭￭￭￭￭￭￭ 415
NOTE
The method name must be unique in the entire client/server system.
[Save]
Save the focused method under the desired method name in the selected
method group.
The method check is automatically carried out before saving the
method; it can also be started manually at any time (see Chapter 5.2.5,
page 413). The method is checked as thoroughly as possible. Checks for
devices, sensors and titrants/solutions are not carried out until the start of
the method in order to ensure that method commands can also be cre-
ated for devices which are not yet configured in the system. If an error is
detected during the method check, a message is displayed asking whether
the method should be saved nevertheless. Faulty methods cannot be
started.
A new method version with a new method identification is created each
time a modified method is saved (see Chapter 5.3.11, page 427). If the
Comment on modification of methods option is activated under
Security settings
▶ Audit Trail ▶ Modifications in the Configura-
tion program part (see Chapter 6.2.2.4, page 1318), then the Modifica-
tion comment method window (see Chapter 5.2.7, page 415) is dis-
played before the method is saved.
5.2.7 Modification comment on method
Menu item: Method ▶ File ▶ Save / Save As…
If the Comment on modification of methods option is activated in the
Security settings
▶ Audit Trail ▶ Modifications in the Configura-
tion program part (see Chapter 6.2.2.4, page 1318) when saving a modi-
fied method or when deleting methods, the Modification comment
method window is opened, in which a reason and a comment on the
modification must be entered.
Reason
Selection from the Default reasons defined for the category Modifica-
tion of methods in the Security settings dialog window (see Chapter
6.2.2.6, page 1320).
Selection Selection from the default reasons
Comment
Entry of a comment for modifying the method.