Metrohm tiamo 2.4 Manual - Manual (Page 1400)

6.6 Subwindow Titrants/Solutions
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1384 ￭￭￭￭￭￭￭￭
tiamo 2.4
[Limit values]
Opens the Limit values for titer dialog window, in which the warning and
intervention limits can be defined for the titer (see Chapter 6.6.3.5, page
1384). These limits apply only to the graph, no monitoring is carried out
during the titer determination.
[Delete history]
Deletes the titer history.
6.6.3.5 Titer history Limit values
Dialog window: Configuration ▶ Titrants/Solutions ▶ [Edit] ▶ Properties... ▶ Titer
history ▶ [Limit values] ▶ Limit values for titer
Warning and intervention limits can be defined for the titer in the Limit
values for titer dialog window. If you have defined the limits, then these
will be shown in the graph in orange for warning limits and red for inter-
vention limits. Whether these limits are observed is not monitored, i.e., if
the limits are exceeded no action will be taken and these solutions can be
used in determinations.
Warning limits for titer
on | off (Default value: off)
If this option is activated, then the titer value will be shown in orange if
these limits are exceeded.
Lower limit
Lower warning limit.
Entry 10 digits
Default value 0.9750
Upper limit
Upper warning limit.
Entry 10 digits
Default value 1.0250
Intervention limits for titer
on | off (Default value: off)
If this option is activated, then the titer values will be shown in red if
these limits are exceeded.
Lower limit
Lower intervention limit.
Entry 10 digits
Default value 0.9500