Metrohm tiamo 2.4 Manual - Manual (Page 1439)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
6 Configuration
tiamo 2.4
￭￭￭￭￭￭￭￭ 1423
6.8 Subwindow Colorimetric sensors
6.8.1 Colorimetric sensors - General
Subwindow: Configuration ▶ Colorimetric sensors
The subwindow Colorimetric sensors contains the data for colorimetric
sensors in tabular form. It can be displayed in the program part Configu-
ration as a component part of the Configuration view or (if not present
on the desktop) in a separate window with View
▶ Quick access. The
subwindow can be enlarged and reduced as required; it can also be maxi-
mized.
6.8.2 Table - Colorimetric sensors
6.8.2.1 Table - Colorimetric sensors
Subwindow: Configuration ▶ Colorimetric sensors
Contents
In the table the following information about the colorimetric sensors is
shown as standard:
Name
Name of the colorimetric sensor.
Calibration date
Display of date and time of the last calibration entered after each auto-
matic calibration or manual entry.
Wavelength
Wavelength at which the calibration of the instrument has been carried
out.
Coefficient of determination
Display of the coefficient of determination R 2 , which is calculated on the
basis of the calibration function and the confidence interval and which is
between 0 und 1. 5 decimal places are displayed.
Confidence interval
Display of the confidence interval within which the measured values for
the determination of the calibration curve must lie.
c0
Calibration coefficient of zero order.