Metrohm tiamo 2.4 Manual - Manual (Page 381)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
4 Database
tiamo 2.4
￭￭￭￭￭￭￭￭ 365
NOTE
Only the last results having been calculated will be shown. For example,
if there are several commands that generate a result with the same
name, then the corresponding result data will be shown only for that
command that was the last to calculate the result. Nothing will be
shown for the other commands.
"Result"
Shows the result name and result value with the defined number of deci-
mal places and units.
NOTE
If a result value is monitored and lies within the limit value defined in
the CALC command then the text will be shown in green, if it lies out-
side the limits it will be shown in red text color.
Mean value:
Shows the mean value for statistically evaluated results.
s(abs):
Shows the absolute standard deviation for statistically evaluated results.
s(rel):
Shows the relative standard deviation for statistically evaluated results.
Minimum:
Shows the minimum value for statistically evaluated results.
Maximum:
Shows the maximum value for statistically evaluated results.
n:
Shows the number of measurements for statistically evaluated results.