Metrohm tiamo 2.4 Manual - Manual (Page 186)

3.6 Run subwindow
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
170 ￭￭￭￭￭￭￭￭
tiamo 2.4
Entry 50 characters
Default value Sample size
Unit
on | off (Default value: on)
Enable/disable the display of the column Sample size unit in the sample
table. The option also exists of renaming the heading of this column in the
working sample table.
Entry 50 characters
Default value Unit
3.6.4.10.3 Properties - Edit
Dialog window: Workplace ▶ Tools ▶ Sample
table ▶ New… ▶ [Sample table] ▶ Properties… ▶ Properties -
Sample table 'Name'
Dialog window: Workplace ▶ Run ▶ Determination series ▶ Prop-
erties Run window ▶ Properties - Determination series
Options for the editing of the sample table.
Apply data with
on | off (Default value: off)
Selection of the data field which must be filled in connection with auto-
matic data import via balance, barcode reader or file in order to apply the
data for the line in the sample data storage and to switch onward to the
next line. If the relevant column is empty, then additional imported data
will be written into the same line. This means that it is possible,
for example, to fill a line first with sample identifications per barcode
reader and then later to apply the sample size from a balance for the
same line.
Selection ID1 | ID2 | ID3 | ID4 | ID5 | ID6 | ID7 | ID8 | ID9 |
ID10 | ID11 | ID12 | ID13 | ID14 | ID15 | ID16 |
Sample size | Unit | Sample position
Default value Sample size
Lock editing in working sample table
on | off (Default value: off)
If this option is activated, then it is not possible to edit lines in the sample
table that is loaded in the working sample table.