Metrohm tiamo 2.4 Manual - Manual (Page 1246)

5.6 Commands
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1230 ￭￭￭￭￭￭￭￭
tiamo 2.4
Stirrer
Stirrer
on | off (Default value: off)
Selection of the stirrer.
Titrando, 730, 846, 856, 867
Selection
1 | 2 | 3 | 4
Default value 1
778, 789
Selection
T1 | T2 (tower stirrer) | 1 … 3 (MSB stirrer)
Default value T1
814, 815, 855, 864, 874
Selection
1 | 2 | 3
Default value 1
Titrino, 756, 831
Selection
1
Stirrer type
Display of the stirrer type. Unknown is displayed either with devices
unable to read out the stirrer type or if no stirrer is connected
Selection 801 Magnetic Stirrer | 802 Rod Stirrer | 803 Ti
Stand magnetic stirrer | 804 Ti Stand rod stir-
rer | unknown
Stirring rate
Setting the stirring rate or rotational speed. The algebraic sign of the stir-
ring rate changes the direction in which the stirring is done. The default
setting 8 corresponds to a rotational speed of 1000 rpm.
Titrando, 814, 815, 846, 855, 856, 867, 864, 874
Input range
-15 - 15
Default value 8
730, 778, 789
Input range
0 - 15
Default value 8