Metrohm tiamo 2.4 Manual - Manual (Page 362)

4.5 Determination overview
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
346 ￭￭￭￭￭￭￭￭
tiamo 2.4
4.5.2.18 Determinations - Overlay curves
Menu item: Database ▶ Determinations ▶ Overlay curves… ▶ Overlay curves
With the menu item Determinations, Overlay curves... or the symbol
the dialog window Overlay curves opens in which overlaid curves of
the selected determinations are shown according to the loaded template.
Template
Selection of a saved template for showing overlaying curves.
Selection Default | "Template" | Last saved template
Default value Last saved template
If a new template is selected then the display will be
updated automatically.
NOTE
In the template the Command type is defined for which the overlay-
ing of curves is possible. Curves from the selected determinations can
only be overlaid when the determination method contains a command
with this Command type (e.g. DET).
Command name
Selection of the command, whose curves are to be displayed with the
selected template.
Selection "Command"
This selection is only necessary if the method con-
tains several commands of the same Command
type.
[Templates]
Open the dialog window Curve overlay templates.
Graphic presentation
Shows the curves according to the settings of the selected template. The
command type (e.g. DET pH) is shown centrally above the graph. At the
right of the curve the legend is shown with the line number in the deter-
mination table belonging to the determination.
The legend consists of the content of a data field which can be defined in
the options of the template and of a counter, which identifies the curves if
the same command has been executed several times during a determina-
tion.