3 method variables of the next sample data line – Metrohm tiamo 2.4 Manual User Manual
Page 51
■■■■■■■■■■■■■■■■■■■■■■
2 General program functions
tiamo 2.4
■■■■■■■■
35
Method variables
Variable name
Description
Data type
.VAL
Value of the method variable
(optional, i.e. 'MV.Factor? =
MV.Factor.VAL') (Text,
Number or Date/Time)
Text, Number
or Date/Time
.OVF
Exceeding limits for method
variable (Number: 1 = limit
exceeded, 0 = limit not
exceeded)
Number
In the following lines you will find the method variables (sample data)
present in the default settings which appear in the Workplace and
which can be edited and deleted in the START command of the corre-
sponding method.
Sample size.VAL
Value of 'Sample size'
Number
Sample size.OVF
Exceeding limit for 'sample
size'
Number
Unit.VAL
Value of 'Unit'
Text
Unit.OVF
Exceeding limit for 'unit'
Number
Sample posi-
tion.VAL
Value of 'Sample position'
Number
Sample posi-
tion.OVF
Exceeding limit for 'sample
position'
Number
ID1 (- 3).VAL
Value of 'ID1 - 3'
Text
ID1 (- 3).OVF
Exceeding limit for 'ID - 3'
Number
2.4.3.3
Method variables of the next sample data line
Dialog window: Formula editor
▶ Variables
Method variables are method-specific and are defined in the START com-
mand of the method. There the data type (Text, Number, Date/Time)
of the variables is defined. Either sample data variables (Sample size,
Unit, Sample position, ID1 - ID16) or fixed values can be assigned to
these variables. The Variables field of the formula editor lists all the
Method variables that are available for the current method.
Syntax
'MV.NEXT.Variable name.Variable identification'
These variables contain the sample data of the next line of the sample
table of a determination series. These variables are distinguished in the