Metrohm tiamo 2.4 Manual - Manual (Page 1383)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
6 Configuration
tiamo 2.4
￭￭￭￭￭￭￭￭ 1367
NOTE
The Audit Trail table is automatically updated when it is opened, but
not afterwards.
6.4.2.9 Monitoring Audit Trail
Dialog window: Audit Trail ▶ Tools ▶ Monitoring ▶ Audit Trail monitoring
With the menu item Tools ▶ Monitoring, the dialog window Audit
Trail monitoring opens.
Monitor number of entries
on | off (Default value: on)
If this option is activated, then the number of entries in the Audit Trail
table will be monitored.
Maximum number
Maximum number of entries allowed in the Audit Trail table. If this num-
ber is exceeded an error message appears.
Input range 10 - 500000
Default value 100000
6.4.2.10 Verifying Audit Trail
Dialog window: Audit Trail ▶ Tools ▶ Verify export / archive ▶ Verify audit trail
export / archive
The menu item Tools ▶ Verify export / archive is used to open the dia-
log window Verify audit trail export / archive in which the checksum
of a file which is exported from the Audit Trail or archived can be checked.
Select file
Entry or selection (with ) of the file that is to be verified.
[Verify]
Trigger the checking of the selected file.
Result
The result of the checking of the checksum is displayed.