Metrohm tiamo 2.4 Manual - Manual (Page 198)

3.8 Subwindow Live display
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
182 ￭￭￭￭￭￭￭￭
tiamo 2.4
Measured value display
on | off (Default value: off)
If this option is activated the measured values required are displayed in the
subwindow Live display.
Measured value 1…3
Selection of the measured values for the measured value display. The mea-
sured quantities and the default value depend on the Command type
selected.
DET
Selection
Volume | Measured value | Time | Tempera-
ture | Calculated 1...3 | External 1...3 | off
Default value off
MET
Selection
Volume | Measured value | Time | Tempera-
ture | Calculated 1...3 | External 1...3 | off
Default value off
SET
Selection
Time | Measured value | Volume | dV/dt | Tem-
perature | Calculated 1...3 | External 1...3 | off
Default value off
MEAS
Selection
Time | Measured value | dMW/dt | Tempera-
ture | Calculated 1...3 | External 1...3 | off
Default value off
MEAS T/Flow
Selection
Time | Measured value | Flow | Calculated
1...3 | External 1...3 | off
Default value off
MEAS TC Cond
Selection
Temperature | Measured value | Time | dMW/
dt | Calculated 1...3 | External 1...3 | off
Default value off
MEAS Opt
Selection
Time | Measured value | Intensity | Transmis-
sion | Saturated pixels | Temperature | d
ε/dt |
Calculated 1...3 | External 1...3 | off
Default value off