Metrohm tiamo 2.4 Manual - Manual (Page 70)

2.4 Formula editor
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
54 ￭￭￭￭￭￭￭￭
tiamo 2.4
You can select the determination variables directly in the formula editor
under Variables/Determination variables in order to avoid syntax
errors.
Available determination variables
Variable name Description Data
type
DUR Duration of the determination in s Number
STT Time point at which the determination was started Date/
Time
2.4.3.7 System variables
Dialog window: Formula Editor ▶ Variables
System variables are general variables which are adopted in the determi-
nation at the start of the determination. They are assigned neither to indi-
vidual commands nor to determinations. The Variables field of the For-
mula editor lists all System variables which are available for the current
method.
Syntax
'SV.Variable name'
Examples: 'SV.SIN', 'SV.SLI'
You can select the system variables directly in the formula editor under
Variables/System variables in order to avoid syntax errors.
Available system variables
Variable name Description Data
type
ACC Autostart actual counter Number
ACE Autostart setpoint counter Number
DID Determination ID Text
FUN Full name of the logged-in user Text
REM Remarks Text
RUN Sample number Number
SEN Indication whether the end of the sample table has been reached; 1 = yes, 0 =
no Number
SIN Indication whether the determination has been started as a single determination
or within a series; 1 = single determination, 0 = series determination Number
SLI Sample table actual line (number) Number
STA Indication whether the statistics is activated; 1 = yes, 0 = no Number