Metrohm tiamo 2.4 Manual - Manual (Page 1624)

8.4 Manual control - Functions
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1608 ￭￭￭￭￭￭￭￭
tiamo 2.4
Sample changer functions
The sample changer functions are displayed on the following tabs:
￭ General
￭ Move
￭ Assign position
￭ Pump
￭ Heater/Gas
Devices
The changer functions can be carried out with the following devices:
730, 774, 778, 789, 814, 815, 855, 864, 874
8.4.4.2 Sample changer - General
Program part: Manual
Information on the attached rack is displayed here. In addition, the shift
rate and lift rate for the manual control of the changer can be set here.
Rack name
Shows the name of the attached rack. If no rack is attached, -------- is dis-
played.
Rack code
Shows the rack code of the attached rack. If no rack is attached, -------- is
displayed.
Number of positions
Shows the number of positions on the attached rack. If no rack is
attached, -------- is displayed.
Shift rate
Shift rate for manual control of the sample changer.
Input range 5 - 20 °/s
Default value 20 °/s
Lift rate
Lift rate for manual control on the selected tower.
730, 778, 789, 814, 815, 855, 864
Input range
5 - 25 mm/s
Default value 25 mm/s
774, 874
Input range
3 - 12 mm/s
Default value 12 mm/s