Metrohm tiamo 2.4 Manual - Manual (Page 265)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
4 Database
tiamo 2.4
￭￭￭￭￭￭￭￭ 249
Width
Width of calibration curve field.
Input range 0.0000 - (max. page width) mm
Height
Height of calibration curve field.
Input range 0.0000 - (max. page height) mm
Command name
Entry of the name of the command for which the calibration curve is to be
produced. With not defined the first calibration curve present in the
determination with the selected Command type will be produced as
default.
Selection not defined | 50 characters
Default value not defined
4.4.2 Templates for control chart
4.4.2.1 Managing control chart templates
Menu item: Database ▶ Tools ▶ Templates ▶ Control chart templates... ▶ Control
chart templates
With the menu item Tools ▶ Templates ▶ Control chart templates...,
the dialog window Control chart templates opens in which the globally
available templates for control charts can be managed.
Template table
The table with the defined templates cannot be edited, although it can be
sorted according to the selected column in increasing or decreasing
sequence by clicking on the column title
Template name
Shows the name of the template.
Result
Shows the result for which the template can be used.
Comment
Shows the comments about the template.