Metrohm tiamo 2.4 Manual - Manual (Page 1592)

7.16 RS-232 device
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1576 ￭￭￭￭￭￭￭￭
tiamo 2.4
Message by e-mail
on | off (Default value: off)
If this option is activated, the message is sent to the e-mail address
defined under [E-mail...]l. The message is sent in text format.
[E-mail...]
[E-mail...] opens the Send e-mail window (see Chapter 2.6.1, page 93).
Acoustic signal
on | off (Default value: off)
If this option is activated, an acoustic signal will be emitted in addition to
the message defined above.
Action
The actions can only be edited if monitoring is switched on.
If during monitoring it is found that the validity period has expired then
one of the following actions will be triggered automatically at start test:
Selection Record message | Display message | Cancel
determination
Default value Display message
Record message
The message that the validity period has expired will be automatically
saved with the determination.
Display message
A message is displayed and you can select whether you want to con-
tinue the sequence or cancel it. If the sequence is continued then the
message that the validity period has expired will be automatically saved
with the determination.
Cancel determination
The running determination will be automatically canceled. The follow-
ing message must be confirmed with [OK].
7.16.5 Establish a connection to the RS-232 device
Dialog window: Configuration ▶ Devices ▶ Properties ▶ RS-232 ▶ Connect
In order to establish a connection to a RS-232 device the button [Con-
nect] has to be pressed on the tab RS-232.
If then a message is entered in the field besides the button [Send] and is
sent, the message received by the device appears in the large text field.
Text field
The messages sent to and received by the device are shown in the large
text field.