Metrohm tiamo 2.4 Manual - Manual (Page 26)

1.10 What is new in tiamo 2.4?
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
10 ￭￭￭￭￭￭￭￭
tiamo 2.4
1.10 What is new in tiamo 2.4?
This chapter describes the changes that were made from tiamo 2.3 to
tiamo 2.4.
1.10.1 New features
General
￭ New determination examples for conductometric titrations are
included in the delivery (was already implemented in tiamo 2.3, Patch
1).
￭ It is now possible to carry out two-channel measurements using two
USB2 Avantes spectrometers that are connected with each other with
a synchronization cable.
Method program part
The flash rate can now be defined for the commands that can be carried
out with the Avantes spectrometer (MEAS Ref, MEAS Spec, MEAS
Opt, MEAS Opt Conc, CAL MEAS Opt).
New instrument firmware
The new versions allow the instruments listed below to be operated
directly via the computer's USB3.0 connectors.
Instruments Firmware version
814 USB Sample Processor 5.814.0025
815 Robotic USB Sample Processor XL 5.815.0026
846 Dosing Interface 5.846.0022
851 Titrando 5.851.0012
852 Titrando 5.852.0012
855 Robotic Titrosampler 5.855.0014
856 Conductivity Module 5.856.0022
857 Titrando 5.857.0022
859 Titrotherm 5.846.0022
864 Robotic Balance Sample Processor XL 5.815.0026
867 pH Module 5.867.0022
874 USB Oven Sample Processor 5.874.0012
888 Titrando 5.888.0022