Metrohm tiamo 2.4 Manual - Manual (Page 400)

4.8 Subwindow Curves
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
384 ￭￭￭￭￭￭￭￭
tiamo 2.4
For MET commands
Selection
Volume [mL] | Measured value | dMW | Time
[s] | Temperature [°C] | Calculated 1...3 | Exter-
nal 1...3
Default value Volume [mL]
For SET, STAT, DOS and KFT commands
Selection
Time [s] | Measured value | Volume [mL] | dV/
dt [µL/min] | Temperature [°C] | Calculated
1...3 | External 1...3
Default value Time [s]
For KFC commands
Selection
Time [s] | Measured value | Amount [µg] |
Charge [mAs] | Drift [µg/min] | dV/dt [µ/min] |
Ugen | Igen [mA] | Calculated 1...3 | External
1...3
Default value Time [s]
For BRC commands
Selection
Time [s] | Measured value | Amount [µg] |
Charge [mAs] | Drift [µg/min] | dV/dt [µ/min] |
Ugen | Igen [mA] | Calculated 1...3 | External
1...3
Default value Time [s]
For TET commands
Selection
Volume [mL] | Measured value [°C] | dT/dV [°C/
mL] | ERC | Time [s] | Calculated 1...3 | External
1...3
Default value Volume [mL]
For MEAS commands
Selection
Time [s] | Measured value | dMW/dt | Temper-
ature [°C] | Calculated 1...3 | External 1...3
Default value Time [s]
For MEAS T/Flow commands
Selection
Time [s] | Measured value | Flow [mL/min] |
Calculated 1...3 | External 1...3
Default value Time [s]
For MEAS TC Cond commands
Selection
Temperature [°C] | Measured value | Time [s] |
dMW/dt | Calculated 1...3 | External 1...3
Default value Temperature [°C]