Metrohm tiamo 2.4 Manual - Manual (Page 1332)

6.2 Administration
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1316 ￭￭￭￭￭￭￭￭
tiamo 2.4
NOTE
If the automatic logout is enabled (see below), then only the same user
or a user with administrator rights can log on again, no matter what
the setting for this option is.
No editing of workplaces in 'BUSY' status
If this check box is activated, then, after a user has logged out manually,
a newly logged-in user can neither edit data nor trigger actions on the
workplaces still open with running determinations. These workplaces will
only be available again when all determinations are finished. For running
determinations the old user name still applies (Audit Trail entries, Save,
Export, etc.). Exceptions are the cancellation of a determination with
[Stop] and the emergency stop, which are always possible for all running
determinations and series.
If this check box is deactivated, then the newly logged-in user has all of
the rights for the opened workplaces which he or she has on the basis of
his or her group membership. The new user name is valid, effective imme-
diately, for the ongoing determinations (Audit Trail entries, Save, Export,
etc.).
Selection on | off
Default value off
Automatic logout after
If this check box is activated, then the user will be logged out automati-
cally when no operating functions have been carried out with the key-
board or the mouse within this time. After this automatic logout, only a
user belonging to the same user group as the previously logged-out user
or a user with administrator rights can log in again.
Selection on | off
Default value off
Input range 1 - 60 min
Default value 10 min
NOTE
The immediate stop of all ongoing determinations at all active workpla-
ces with the emergency stop button remains possible even after an
automatic logout.