Metrohm tiamo 2.4 Manual - Manual (Page 1059)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
5 Method
tiamo 2.4
￭￭￭￭￭￭￭￭ 1043
Device type
Display or selection of the instrument type. If an instrument is selected in
the Device name field, the Device type field can no longer be edited
and the instrument type belonging to the instrument is displayed.
If the not defined option is selected in the Device name field, all instru-
ment types or groups with which the command can be executed can be
selected, regardless of the instruments present in the device table.
Selection Avantes Spectrometer
Default value Avantes Spectrometer
Instrument for reference channel
Shows the name of the instrument for the reference channel.
5.6.4.13.3 MEAS Spec - Measuring parameters
Tab: Method ▶ MEAS Spec ▶ Properties... ▶ Measuring parameters
Command name
Name of the command.
Entry 25 characters
The parameters for the measuring procedure can be defined on this tab.
Start wavelength
Lower limit of the spectrum.
Input range 100.0 - 2,000.0 nm
Default value 400.0 nm
End wavelength
Upper limit of the spectrum.
Input range 100.0 - 2,000.0 nm
Default value 1,000.0 nm
Integration time
Integration time for spectrum recording.
Input range 0.01 - 600000 ms
Default value 6 ms
Averaged spectra
Number of spectra that are recorded and averaged.
Input range 1 - 10000
Default value 10