Metrohm tiamo 2.4 Manual - Manual (Page 1612)

8.1 Manual control - General
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1596 ￭￭￭￭￭￭￭￭
tiamo 2.4
8 Manual control
8.1 Manual control - General
Program part: Manual control
Definition
The term Manual control is used in tiamo to refer to the program part
in which the connected devices can be directly controlled, i.e. without a
predefined run instruction. The precondition for this is that the devices are
switched on and detected by tiamo. Manual control is also possible live
during a method run.
Closing
The Manual control dialog window can be closed with [Close] or the
Windows buttons for closing.
NOTE
The manual control can only be closed when no manually triggered
actions are running any longer (exception: stirrer on).
8.2 Manual control - Desktop
Program part: Manual Control
Manual Control symbol
If you click on the Manual symbol in the vertical bar on the left margin,
the program part Manual Control will be opened in its own window,
while the Manual symbol will be shown in color at the same time.
Elements
The desktop of the program part Manual control comprises the follow-
ing elements:
￭ Selecting device
￭ Functions/Parameters
￭ Graphic function