Metrohm tiamo 2.4 Manual - Manual (Page 1441)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
6 Configuration
tiamo 2.4
￭￭￭￭￭￭￭￭ 1425
Column display... Define the columns for the table of the colorimetric sensors (see Chapter
6.8.2.2, page 1425)
&Print (PDF)... Printout of the colorimetric sensor table as PDF file (see Chapter 6.8.2.5, page
1426)
6.8.2.2 Colorimetric sensors - Column display
Dialog window: Configuration ▶ Colorimetric sensors ▶ Edit ▶ Column dis-
play... ▶ Column display
The columns which are to be displayed in the table of the colorimetric
sensors can be defined in the dialog window Column display.
Columns available
Display of all the fields that can be shown as columns in the sensor table.
Columns displayed
Display of all fields which are displayed as columns in the overview table
for the colorimetric sensors. In the default settings, the columns Name,
Calibration date, Wavelength, c0, c1, c2, c3, Confidence interval,
Outlier and Coefficient of determination are displayed in this
sequence. Name is fixed and cannot be removed.
Add the selected column to the table.
Remove the selected column from the table.
Modify the sequence of displayed columns by moving the selected column
up and down.
6.8.2.3 Adding a new colorimetric sensor
Menu item: Configuration ▶ Colorimetric sensors ▶ Edit ▶ New...
New colorimetric sensors are entered in the table using the menu item
Edit
▶ New....
The properties window then opens automatically for the configuration of
the colorimetric sensor (see Chapter 6.8.3.1, page 1426).
Sorted by
The colorimetric sensors are in alphabetical order in the table. In ascend-
ing or descending order, depending on the selection made.