Metrohm tiamo 2.4 Manual - Manual (Page 57)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
2 General program functions
tiamo 2.4
￭￭￭￭￭￭￭￭ 41
Identifica-
tion Description Commands
.EP{x}.DME Measured value differential for
the endpoint x (1 - 9) MET
.EP.DVT Drift for the endpoint x (1 - 9) in
µg/min KFC, BRC
.EP{x}.ERC ERC for the endpoint x (1 - 9) DET
.EP{x}.MEA Measured value for the endpoint
x (1 - 9) in the unit of the mea-
sured value DET, MET, SET,
KFT, KFC, BRC
.EP{x}.MEP Number of endpoints in the win-
dow x (1 - 9); 1 = 1 endpoint, 2
= 2 or more endpoints, 3 = EP
corrected with Autodrift, 4 =
EP corrected with manual
drift DET, MET, SET,
KFT
.EP.QTY Measured value for the endpoint
in µg KFC, BRC
.EP{x}.TEM Temperature for the endpoint x (1
- 9) in °C DET, MET, SET,
KFT, KFC, BRC
.EP{x}.TIM Time in s until the endpoint x (1 -
9) is reached DET, MET, SET,
KFT, KFC, BRC
.EP{x}.VOL Volume for the endpoint x (1 - 9)
in mL DET, MET, SET,
KFT
.EPP Position after finishing the com-
mand. 0 = invalid position. PORT
.ETE End temperature (temperature
following processing of the com-
mand) in °C DET, MET, SET,
KFT, KFC, BRC,
STAT, MEAS
(without T/Flow,
Ref, Spec), CAL
Cond, CAL
MEAS, STDADD,
DOS, ELT MEAS