Metrohm tiamo 2.4 Manual - Manual (Page 1388)

6.5 Subwindow Devices
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1372 ￭￭￭￭￭￭￭￭
tiamo 2.4
6.5.2.5 Editing ignored devices
Dialog window: Configuration ▶ Devices ▶ [Edit] ▶ Ignored devices ▶ Ignored devi-
ces
With [Edit] ▶ Ignored devices, the dialog window Ignored devices is
opened. Here the list of ignored devices can be edited.
Ignored devices are devices which are recognized automatically upon con-
nection but are ones which the user does not wish to have permanently
displayed in the device table. Ignored devices will no longer be recognized
automatically at the time of the next program start.
Table contents
The following information concerning the ignored devices is shown in the
table:
Device type
Type of device.
Device serial number
Serial number of the device.
[Delete]
The highlighted device is removed from the list. It will be recognized auto-
matically again at the time of the next program start and can be included
in the list of devices.
6.5.2.6 Printing the device list
Dialog window: Configuration ▶ Devices ▶ [Edit] ▶ Print (PDF)... ▶ Print list of
devices (PDF)
With [Edit] ▶ Print (PDF)..., the dialog window Print list of devices
(PDF) is opened.
Orientation
Selection
Portrait | Landscape
Default value Portrait
Portrait
Output of the device table in portrait format.
Landscape
Output of the device table in landscape format.
[OK]
The table of devices is shown in the required format as a PDF file and can
be opened directly with the Acrobat Reader; it can then be printed out
and/or saved.