Metrohm tiamo 2.4 Manual - Manual (Page 1650)

9.2 Backup
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1634 ￭￭￭￭￭￭￭￭
tiamo 2.4
Backing up configuration data manually
1 Select the Configuration program part.
2 Click on the File ▶ Backup ▶ Manually menu item.
The Backup configuration data manually dialog window opens.
3 Select the directory for the backup in the Backup directory field.
4 Select or enter the name for the desired backup file in the Backup
name list box. If an existing backup file is selected, it will be over-
written.
NOTE
If the backup directory is on a network drive, the backup date
should be added to the Backup name because the backup date
information is not available when the data is restored.
5 Click on [Start].
The manual backup of the configuration database is started.
Backing up configuration data automatically
1 Select the Configuration program part.
2 Click on the File ▶ Backup ▶ Automatically menu item.
The Backup configuration data automatically dialog window
opens.
3 Activate the Automatic backup check box.
4 Enter an Interval for backup monitoring or a date for the Next
backup.
5 Select the directory for the backup in the Backup directory field.
6 Click on [OK].