Metrohm tiamo 2.4 Manual User Manual
Page 1308
5.6 Commands
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1292
￭￭￭￭￭￭￭￭
tiamo 2.4
Selection
Stop track and waiting for [Continue] | Stop
all tracks and waiting for [Continue] | Waiting
time
Default value
Stop track and waiting for [Continue]
Stop track and waiting for [Continue]
If this option is enabled, the track containing the WAIT command is
stopped and a message is displayed. The method run can only be con-
tinued by pressing [Continue].
Stop all tracks and waiting for [Continue]
If this option is enabled, all tracks currently running are stopped and a
message is displayed. The method run can only be continued by press-
ing [Continue].
Waiting time
If this option is enabled, the method run will be continued automati-
cally after this waiting time. The text defined below under Message is
displayed during the waiting time.
Waiting time
This parameter can only be edited for Wait= Waiting time
Input range
0 - 9999.9
Default value
0
Selection
s | min
Default value
s
Message
The message defined here is displayed while the track is stopped or during
the waiting time. The text editor for entering or changing the message is
opened with
or by double-clicking into the text field (see Chapter
2.5.2, page 91). The formula editor can also be called up inside the text
field (see Chapter 2.4, page 30).
Entry
Text (unlimited)
Record message
on | off (Default value: off)
If this option is enabled, the message defined in the text box will be docu-
mented in the determination.
Message by E-mail
on | off (Default value: off)
If this option is enabled, the message defined in the text box will be sent
to the address defined under [E-mail].