Metrohm tiamo 2.4 Manual - Manual (Page 1041)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
5 Method
tiamo 2.4
￭￭￭￭￭￭￭￭ 1025
Selection off
Default value off
off
No stop.
Temperature
Measuring temperature
Temperature of the solution to be measured. If a temperature sensor is
connected, the temperature entered here is ignored.
712
Input range
-170.0 - 500.0 °C
Default value 20.0
856
Input range
-20.0 - 150.0 °C
Default value 20.0
Reference temperature
The electrical conductivity depends greatly on the temperature. The con-
ductivity measured at a particular temperature is thus automatically con-
verted to this reference temperature (usually 20 °C or 25 °C).
712
Input range
-170.0 - 500.0 °C
Default value 20.0
856
Input range
-20.0 - 150.0 °C
Default value 20.0
Selection off
off
The conductivity at the measuring temperature is displayed.
Temperature compensation
Definition of the type how the temperature compensation is to be carried
out.
Selection Temperature coefficient | Sample solution
Default value Temperature coefficient
Temperature coefficient
Manual entry of a constant temperature coefficient.