Metrohm tiamo 2.4 Manual - Manual (Page 1330)

6.2 Administration
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1314 ￭￭￭￭￭￭￭￭
tiamo 2.4
Enforce login with password
If this check box is activated, then each time the program starts the login
window will appear, in which the user must enter not only his or her user
name but also a password. If this option is disabled, then all of the sub-
sequent parameters will be deactivated.
Selection on | off
Default value off
FDA default: on (can no longer be edited)
Password monitoring by tiamo
If this option is enabled, then the password will be monitored by tiamo
in accordance with the subsequent parameters.
Selection on | off
Default value off
FDA default: on (editable)
Password monitoring by Windows
If this option is enabled, then the password will be monitored in accor-
dance with the parameters defined in Windows. The parameters for pass-
word protection are deactivated in this case.
Selection on | off
Default value off
CAUTION
In order to prevent an unwanted login by means of the Guest user cat-
egory that is defined by default in Windows when performing password
monitoring with Windows, it is imperative that this user also be
assigned a password or (even better) be deactivated.
CAUTION
If this option is enabled, then the user names in Windows and tiamo
must necessarily match, because otherwise the user will no longer be
able to log in to tiamo. In order to ensure this, once this selection has
been made, the Test login dialog window (see Chapter 6.2.2.3, page
1318) appears in which the logged-in user must log in with his or her
Windows password. If this test login fails, then the Security settings
dialog window will remain open.