Metrohm tiamo 2.4 Manual - Manual (Page 1498)

7.3 864 Robotic Balance Sample Processor
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1482 ￭￭￭￭￭￭￭￭
tiamo 2.4
Action
The actions can only be edited if monitoring is switched on.
If during monitoring it is found that the validity period has expired then
one of the following actions will be triggered automatically at start test:
Selection Record message | Display message | Cancel
determination
Default value Display message
Record message
The message that the validity period has expired will be automatically
saved with the determination.
Display message
A message is displayed and you can select whether you want to con-
tinue the sequence or cancel it. If the sequence is continued then the
message that the validity period has expired will be automatically saved
with the determination.
Cancel determination
The running determination will be automatically canceled. The follow-
ing message must be confirmed with [OK].
7.3 864 Robotic Balance Sample Processor
7.3.1 864 Robotic Balance Sample Processor - Overview
Dialog window: Configuration ▶ Devices ▶ [Edit] ▶ Properties... ▶ Properties - 'De-
vice type' - 'Device name'
The parameters for the 864 Robotic Balance Sample Processor are
set on the following tabs:
￭ General
General device information such as device name, device type, serial
number, etc.
￭ Tower #
Properties of tower 1 and tower 2 (if present).
￭ Rack
Information on the rack attached.
￭ Initializing position
Defining a position which is automatically approached when the sam-
ple changer is initialized.
￭ MSB #
Properties of the MSB connector 1 - 3 and the peripheral devices con-
nected to it.
￭ GLP
Information on GLP tests and GLP monitoring.