Metrohm tiamo 2.4 Manual - Manual (Page 1367)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
6 Configuration
tiamo 2.4
￭￭￭￭￭￭￭￭ 1351
6.3.4.3 Options - Save
Tab: Configuration ▶ Tools ▶ Options... ▶ Options ▶ Save
Save on closing
It can be defined here which settings are to be saved when the program is
exited. If the option is enabled, the current view with its settings will be
saved automatically when the program is exited. If the option is disabled,
then any modifications that may have been made to the view will not be
saved and the original, manually saved view will be loaded the next time
that the program is started.
Configuration settings
on | off (Default value: off)
Activates/deactivates the saving of the configuration view when exiting.
Workplace settings
on | off (Default value: off)
Activates/deactivates the saving of the workplace view when exiting.
Database settings
on | off (Default value: off)
Activates/deactivates the saving of the database view when exiting.
6.3.4.4 Options - PDF
Tab: Configuration ▶ Tools ▶ Options... ▶ Options ▶ PDF
Security permissions for PDF files
Content copying or extraction allowed
on | off (Default value: on)
If this check box is deactivated, then content cannot be copied or taken
from the PDF file.
Printing allowed
on | off (Default value: on)
If this check box is deactivated, then the PDF file cannot be printed.
Adding or changing comments allowed
on | off (Default value: on)
If this check box is deactivated, then comments and form fields can nei-
ther be added nor changed.